Home › Waste codes › Chapter 11

11 03 01* Wastes containing cyanide

EWC / List of Waste code · Last checked 21 October 2026 · Applies across the UK (England, Wales, Scotland and Northern Ireland)

Hazardous Absolute hazardous entry

Official description: “wastes containing cyanide”

Where it sits: chapter 11 (wastes from chemical surface treatment and coating of metals and other materials; non-ferrous hydro-metallurgy), section 11 03 (sludges and solids from tempering processes).

What the hazard status means

Waste that matches this description is always hazardous waste, whatever the amount of hazardous substances in it. You do not need to test it to decide whether it is hazardous, but you still need to know its hazardous properties to fill in the paperwork.

Using this code

Write the code on the paperwork when waste is passed on: a waste transfer note for non-hazardous waste, or a consignment note for hazardous waste (called special waste in Scotland).
Choose the code from where the waste came from first (the chapter), then what it is. If a load is mixed, you may need more than one code.
The waste must go to a site whose permit allows that code. A registered carrier can tell you which codes they accept: check a waste carrier.
Businesses have a duty of care to describe their waste correctly.

Other codes in section 11 03

11 03 02* Other wastes Hazardous

This page explains the code in plain English. It is not a classification of your waste. The official List of Waste and the classification guidance decide which code applies, and you are responsible for the code you use.

11 03 01* Wastes containing cyanide

What the hazard status means

Using this code

Other codes in section 11 03

Official sources